CALL US NOW on 023 8026 1188

Zanotti Stationary Refrigeration Systems

Southern Sales & Services supply a comprehensive line up of Zanotti commercial and semi-industrial refrigeration units that are designed to maintain temperature sensitive products at their optimum temperature, adopting efficient solutions for every application.

These complete system units are suitable for refrigerating products inside small, medium or large sized cold rooms, as well  as mobile cold rooms and containers.

Their refrigeration series are available in a wide range of capacities, with variable dimensions and with different types of mounting, such as the monoblock units with wall or roof mounting, split units with wall, roof or a ground mounted condenser.

Monoblock Units for Cold Rooms

  • SB
  • SB R290
  • GM
  • GM R290
  • AS
  • RS
  • BX

SB Series

Ceiling-mounting monoblock units.

  • Quick installation on the cold room roof
  • The ceiling installation leaves the space inside the cold room completely free
  • The white color of the evaporator blends discreetly with the walls of the cold room
  • Extremely quick to install, reducing times and costs of installation
  • Best surface-capacity ratio
  • Remote electronic control panel with user-friendly interface

SB R290 Series

Ceiling-mounting propane monoblock units.

  • Use of natural and efficient refrigerant R290 (GWP 3)
  • Low R290 refrigerant charge <150 g per circuit
  • Multiple circuits for bigger models
  • Medium and low temperature range
  • Hermetic piston compressors
  • Hot gas defrost
  • Air or water condensation (for water: plate exchanger and water solenoid valve)
  • Expansion by capillary tube for air condensation and thermostatic valve for water condensation
  • Dixell electronic controller
  • Serial output for connection to monitoring system
  • Different voltage available
  • Single circuit models: available with remote keyboard
  • Multicircuits models: available in master stand-alone version with remote keyboard and dedicated kit and slave version
  • The F-gas regulations do not apply to systems that contain only natural refrigerants such as propane (R-290)

GM Series

Efficient and reliable monoblock units with avantgarde management technology.

  • Quick straddle wall installation ideal for new applications or through wall installation ideal for renovations
  • Condensing part body with metallic gray finishing
  • The white color of the evaporator blends discreetly with the walls of the cold room
  • Compressor compartment is ready to be insulated with suitable sound-absorbing material to reduce noise levels
  • Micro-channel condensers are available on the smallest frame (GM1) to reduce the refrigerant charge as much as possible and ensure higher energy efficiency
  • Units equipped with a new generation control panel with an easy-to-use interface suitable to be connected to monitoring and remote management systems

GM R290 Series

Propane monoblock units with avantgarde management technology.

  • Use of natural and efficient refrigerant R290 (GWP 3)
  • Low refrigerant charge <150g
  • Medium and low temperature range
  • Hermetic piston compressors
  • Hot gas defrost
  • Air or water condensation (for water: plate exchanger and water solenoid valve)
  • Expansion by capillary tube for air condensation and thermostatic valve for water condensation
  • Eliwell electronic controller
  • Serial output for connection to monitoring system
  • Different voltage available
  • • The F-gas regulations do not apply to systems that contain only natural refrigerants such as propane (R-290)

AS Series

Monoblock system for low and medium temperatures and suitable for medium size coldrooms.

  • Quick installation on the cold room wall
  • Extremely quick to install, reducing times and costs of installation
  • The white color of the evaporator blends discreetly with the walls of the cold room
  • Very compact and very efficient
  • Electronic control unit with easy-to-use user interface that can be programmed according to the different needs of the system

RS Series

Dual-temperature monoblock system, suitable for freezing and for medium or large size cold rooms and freezing tunnels.

  • Extreme versatility of use, low-medium temperatures, polyvalent temperatures and freezing tunnels
  • Suitable for different types of applications
  • Compact and highly resistant to any environmental condition
  • Solenoid valve and thermostatic valve for high efficiency
  • Control panel with electromechanical instrumentation for controlling all the functionalities of the machine

BX Series

Dual-temperature monoblock systems, suitable for freezing and other industrial applications.

  • Extreme versatility of use, low-medium temperatures, polyvalent temperatures and freezing tunnels
  • Suitable for different types of industrial applications
  • Compact and highly resistant to any environmental condition
  • Solenoid valve and thermostatic valve for high efficiency
  • Electrical switchboard with electromechanical instrumentation and remote control panel with thermostat for controlling all the functionalities of the machine

Bi-block Units for Cold Rooms

  • GS
  • SP-O
  • DB-O
  • DB-D

GS Series

Split system suitable for low and medium temperatures, designed for use in small to medium rooms.

  • Wide versatility of installation of condensing part and evaporating part
  • Condensing part body with metallic grey finishing
  • The white color of the evaporator part blends discreetly with the walls of the cold room
  • Compressor compartment is ready to be insulated with suitable sound-absorbing material to reduce noise levels
  • Micro-channel condensers available to reduce the refrigerant charge as much as possible and ensure higher energy efficiency

SP-O Series

Split system suitable for low and medium temperature, suitable for small to medium sized cold rooms.

  • Condensing unit for floor or roof installation and evaporator for ceiling mounting
  • Extremely quick mounting thanks to the quick coupling joints
  • Reduced installation times and costs
  • Best surface-capacity ratio

DB-O Series

Split system suitable for low and medium temperature,  which is suitable for outdoor installation and for small-medium cold rooms.

  • Condensing unit for floor or roof installation and evaporator for ceiling mounting
  • Thermostatic expansion valve for an optimal refrigerant flow rate and for higher energy efficiency
  • Extremely quick mounting thanks to the quick coupling joints
  • Reduced installation times and costs
  • Best surface-capacity ratio

DB-D Series

Dual temperature split system suitable for freezing, and for industrial applications or a freezing tunnel.

  • Extreme versatility of use, low-medium temperatures, polyvalent temperatures and freezing tunnels
  • Suitable for different types of industrial applications
  • Compact and highly resistant to any environmental condition (ideal for outdoor installation)
  • Possible simultaneous management of one or more units

Units for Containers & Mobile Cold Rooms

  • AS 1000
  • AS-R / AS-E

AS 1000

Monoblock units suitable for containers.

  • Ideal for storing fresh products in cold rooms mounted on trailers subject to constant movement
  • Special unit for outdoor applications
  • Extremely solid and effective
  • Easy, fast and cost-effective installation
  • Precise and functional unit control

AS-R / AS-E

Monoblock system for low and medium temperatures, which are suitable for product storage in mobile cold rooms.

  • Suitable for the storage of fresh products in cold rooms mounted on trailers subject to continuous movement
  • Special units for outdoor installations
  • Extremely solid and effective
  • Easy, fast and cost-effective installation
  • Precise and functional control of the unit

Units for Rooms for Storing Bottled Wine

  • RCV
  • RDV

RCV Series

Monoblock system for refrigeration to high temperatures, and which are perfect for bottled wine storage.

  • Accurate control of humidity and temperature to guarantee products quality
  • Single electronic controller to manage humidity and temperature
  • The quick and easy through wall installation is non-invasive for the room volume

RDV Series

Monoblock system for refrigeration to high temperature with split units for bottled wine storage.

  • Accurate control of humidity and temperature to guarantee products quality
  • Thermostatic expansion valve for an optimal refrigerant flow rate and for higher energy efficiency
  • Quick and easy to install, the RDV, thanks to its split type structure, allows many choices of installation

Units for Rooms for Food Processing

  • SAS
  • SAR
  • UAV
  • USV

SAS Series

Split or monoblock system with humidity control, ideal for drying and ageing units for small and medium cold rooms.

  • Constant and detailed control of temperature and humidity level during operation
  • Compact and functional with removable panels to allow easy access to internal components
  • Durable exterior body
  • Precharged with refrigerant, equipped with filter dryer and fixed calibration maximum and minimum pressure switches with automatic reset

SAR Series

Monoblock system with humidity control, for units for post-salting resting of hams for small and medium cold rooms.

  • Constant and detailed control of temperature and humidity level during operation
  • Compact and functional, with removable panels to allow easy access to internal components
  • Durable exterior body
  • Precharged with refrigerant, equipped with filter dryer and fixed calibration maximum and minimum pressure switches with automatic reset

UAV Series

System with a temperature and relative humidity control, for air handling units for industrial drying.

  • Reproduction of customized drying and ageing cycles to guarantee the treatment of products in all seasons with any external climatic variation
  • Efficient air handling unit made of AISI 304 stainless steel
  • Equipped with removable panels for easy access to the components completely contained within the body
  • The units are precharged with refrigerant and complete with liquid receiver, taps, safety valve, filter drier and sight glass

USV Series

System with a temperature and relative humidity control, for air handling units for industrial ageing.

  • Reproduction of customized drying and ageing cycles, to guarantee the production in all seasons with any external climatic variation
  • Efficient air handling unit made of AISI 304 stainless steel
  • Equipped with removable panels for easy access to the components completely contained within the body
  • The units are precharged with refrigerant and complete with liquid receiver, taps, safety valve, filter drier and sight glass

© 2024 Southern Sales and Services Ltd. All rights reserved.
Website made with by Thrive Digital.